What to Do Before Starting model 300 Electric Pellet Mill?

This portable electric pellet mill can be used, together with hammer mill, feed blender, conveyor and pellets packing machine, to make animal feed pellets for chicken, cattle, duck, cow, sheep, pig, etc. on a small scale. By the way, this pellet mill also can be used to make wood pellets from wood wastes. If you want to start a small feed pellet plant or wood pellet plant, model 300 is a right choice for you to earn money with less investment.
feed pellet mill
Structure of model 300 Movable Pellet Press
 Name Name Name Name Name
1Upper hopper4Lower shell7Discharge gate10Current meter13Electric control box support
2Adjusting screw5Dipstick8Gear box11Voltmeter14base
3Upper shell6Checking screen9Base wheel12Electric control box15Motor

Features of This Small Pellet Mill

1. It has simple structure and it can be easily cleaned and maintained.
2. It provides small capacity at lower price; it is in small size and light weight; it is a best choice for pellet production on a small scale.
3. This
animal feed pellet mill is easy to operate--just 1 or 2 workers can operate the pellet machine.
4. Operators are able to have a view of the chamber, so it is easy to find problems during pelleting.
5. Spare parts, i.e. rollers and die are easy to change.
6. It is also a right choice for wood pellet producers and animal bedding pellet producers.
What to Do Before Starting model 300 Electric Pellet Mill?
A. Location
1. Place the pellet machine at a  safe and dry place. 
2. Do not operate the
feed pellet mill at a temperature of below 10 degree celsius.
3. Make sure all bolts and nuts are securely tightened before operation.
B. Test Run
Before starting producing pellets, it is important to polish the die to make it smooth. To do this, you need to prepare 5kg flour, 5kg fine sand and 1.5 liter vegetable oil, and then mix the ingredients into a bucket. next, start the
pellet making machine, and then put a proper amount of mixed materials into the mill and let them run through the die hole. You should do this repeatedly for 40-60 minutes.
C. Before first run, adopt grease to lubricate all bearings. The operator needs to do this once at lease every 10 hours.
D. Set the pressure for the roller wheels. To do this, just drag the die and find whether it can rotate under the rollers. The gap between rollers and die should be controlled within 0.1-0.3mm.



about us


animal feed pellet mill for making chicken feed, pig feed,and so on for your poultry farm

new articles
blog archieves
month archieves
12 | 2019/01 | 02
sun mon tue wed thu fri sat
- - 1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31 - -
friendly links
contact us


adding friends

adding this blog as a friend

new comment
new quote