How to Make Pellets by model 400 Electric Flat Die Pellet Mill?

It is advisable for you to buy model 400 electric pellet mill to turn agricultural wastes or wood residues into wood pellets for heating and cooking or make your own feed pellets for animals, if you have a large quantity of wood residues; or you own a large farm and having many agricultural wastes to dispose of; or you are a farmer who breeds animals, such as chicken, ducks, sheep, cattle or pigs, etc.

Features of model 400 Electric Flat Die Pellet Mill

1. Due to its structure, this pellet press can process various biomass materials and grains into fuel pellets or feed pellets.
2. Both the flat die and rollers are made of high-quality alloy steel, so it is wear resistant and it has a long service life.
3. Just following the manual, you can easily operate the
feed making machine to make your own pellets.
4. It is in small size, thus it is easy to move.
5. It can be easily maintained.
6. Just one or two persons can operate it.

How to Make Pellets by model 400 Electric Flat Die Pellet Mill?

1. Insert the plug of the machine, and press the start button. The engine should start and the rollers rotate. If the rollers do not rotate, press the stop button immediately to check for fault.
2. Place a container under the pellet discharge chute.
3. Feed the raw materials into the feeding hopper and then control the speed by the handle of the feeding control tray.
4. After a short time, pellets will fall into the container. After cooling, pellets will become hard.
5. Feed the rest of the material and change the container when it is full.
6. Do not stop the
price for sale of feed pellet mill during the pelletizing (except for emergency), otherwise the pellet machine will be clogged when restarting.
7. Stop the pellet mill by pressing the stop button.
8. Clean the pellet mill after a shift. This step is very important as if the residual raw material will stick on the roller and die when it cools completely and it is difficult to be removed.

How to Change Rollers and Dies of This Flat Die Pellet Machine?

1. Disconnect the power connector
2. Remove the feed hopper
3. Loosen the nuts on the handle of the feed control tray, as shown in picture 
4. Loosen the nuts which fix the two sides of the die and the feed control tray, as shown in picture 
5. Lift down the feed control tray, as shown in picture 
6. Loosen the big nut and remove it, as shown in picture 
7. Take down the roller, as shown in picture 
8. Tightening the nuts on both sides of the die, as shown in picture 
9. Lift down the die, as shown in picture 

10. Change for the new rollers and the die.
11. Set the machine back together with the new roller and die in reverse order.




about us


animal feed pellet mill for making chicken feed, pig feed,and so on for your poultry farm

new articles
blog archieves
month archieves
12 | 2019/01 | 02
sun mon tue wed thu fri sat
- - 1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31 - -
friendly links
contact us


adding friends

adding this blog as a friend

new comment
new quote