Why Choose Wet Type Floating Fish Feed Pellet Mill

 Why Choose Wet Type Fish Feed Pellet Mill                                                                                                                                                Steam Boiler
steam boiler
According to your requirement and production scale, we can supply two types of fish feed making machine: dry type and wet type. However, what is difference and why choose the wet one? Please follow me to learn about pellet extrusion principle. Pellet extrusion is a process where the feedstuff is subject to mixing and heating under high pressure before being forced through a die mould. The feed constituents undergo transformations during the processing that can be beneficial as they are fully cooked and the nutritional value is improved. A temperature higher than 100 ℃ is needed in order to achieve expansion of the feed as it leaves the die. Extrusion temperature is usually a targeted value obtained through steam added in the pre-conditioner. Our wet type fish feed extruder machine is connect to a boiler which can continuously provide steam to the conditioner.
Wet Type Fish Feed Mill Application
◆ Make high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc.
◆ Ideal for making pet food for dogs, cats, etc.
◆ First choice of fish feed pellets manufacturers.
fishes
floating fish food processing
fish food
pet dog food
The Features of Wet Type Fish Pellet Pellet Press
1. You can change different molds to make pellets with different diameters.
2. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours.
3. The fish feed pellet size can be from 0.9-15mm to feed different size fishes.                                                                                                              
4. The spare parts like screw, barrel of wet type will be less damaged than dry type.
5. The feed pellet made by wet type fish
feed pellet mill is more smooth and with better quality. 
6. High temperature and high pressure process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
Attentions
◆ Our fish feed extruder is of single screw design.
◆ The pellets extruded from such
animal feed pellet mill is about 80℃ and moisture content is 18%-20%, so you should equip a dryer and cooler if the capacity is more than 500kg/h. While for small capacity, you can dry them in the sun.
◆ We provide technical formula for making floating fish feed pellets after placing order.
◆ We send extra easy wear parts for free including two sleeves, one screw, one cutting knife and three die moulds.

Dry Type or Wet Type, Which Fish Feed Pellet Machine is Suitable For You?

 Fish Feed Pellet Machine Introduction
we are in designing and manufacturing
fish feed making machine. We have two types fish feed pellets extruder: Dry Type Fish Feed Pellet Machine and Wet Type Fish Feed Pellet Machine. According to your requirement, you can choose to produce floating fish feed pellets or sinking feed pellets. Amisy feed pellet extruder can produce animal feed pellets with diameter from 1-15mm, applicable to produce pet food, fish feed pellets, shrimp feed and other animal feed pellets.
Why Choose Puffing Fish Feed Pellet Machine
1. This
animal feed pellet mill can make various grain waste into animal feed pellets with rich nutrition and easy digestion. 
2. Not only for making fish feed pellets, but also suitable for making feed pellets for dog, cat, bird, rabbit, fox, etc.
3. Popular with animal breeders, medium sized feed stuff factory.
4. Feed pellets produced by victor
feed pellet mill are of smooth surface, floating more than 12 hours.
Dry Type or Wet Type, Which Fish Feed Pellet Machine is Suitable For You?
The highlight difference between the two type puffing feed pellet machines are whether equipped with conditioner which is used to connect steam boiler, that is also to say, wet type need to install a steam boiler, while the dry type one doesn't need it. The other difference is the capacity, take DSP60 for example, the capacity of dry type fish feed pellet machine is 0.12-0.15t/h, while the wet one is of 0.18-0.20 t/h. So considering the two factors, you'd better choose the most cost-effective machine. If you have any other question, please chat on-line, leave us a message or send email.
A. Dry Type Fish Feed Pellet Machine Features
1. Easy operation, installation and maintenance. Material directly entering the pressing chamber, through high press pelletized, speedy screw push and high temperature, are made into puffing feed pellets.
2. Suitable for small size feed stuff factory or home use.
B. Wet Type Fish Feed Pellet Machine Features
1. Equipped with conditioner. The materials are fully mixed and cooked.
2. Need to install a steam boiler to connect with conditioner.
3. Feed pellets are more smooth and easy to digest.
4. Low lubrication of screw shaft and pressing chamber.

making floating fish feed pellets for your farm to save cost

floating feed pellet machine is an original fish feed machine for animal feed. This pellet maker is equipped with high quality die and screws nd has advanced technology. For driving system we use double motor shaft driven, which is of little space occupation, uniform stress, simple structure and easy operation. Users can change motor and die to meet the needs of different production capacities and specs, thereby obtains ideal technology and economy effect.This animal feed extruder machine adopts international advanced technology, the pellets are very even, and we can adjust the cutter to get the different diameter and the length Screw sleeve of this floating fish feed extruding machine adopts enchase alloy steel strip structure, which guarantees long service life.
Main components of this floating fish feed extruder machine use special alloy materials made of heat-treated, strong abrasive resistance and long service life.

advantages of floating feed machine


1.We can adjust the cutter of floating fish feed pellet mill to get different diameter and the length
2.The Electric heating device improve the feed expansion rate.
3. the floating fish feed pellet machine has high temperature and high pressure can kill the salmonellosis and bacterial infections.
4.The automatic floating fish feed pellet processing machine can float in water for 12 hours.
5.This floating feed extrusion machine can make various grain waste into animal feed pellets with rich nutrition and easy digestion.
6. Not only for making fish feed pellets, but also suitable for making feed pellets for dog, cat, bird,
7. the floating feed pellet machine is very popular with animal breeders, medium sized fish feed stuff factory.

B[()GAUY3~WL4~E$_B{_3YR DGP90-B 

fish feed extruding machine for making floating pellets

we are sepecialized in designing and manufacturing floating fish feed pellet machine.We have two types feed extruder machine: Dry Type Fish feed extruding machine and Wet Type feed extruding machine.As per your requirement,you can choose to produce how much big of finished floating fish feed pellets. our feed extruding machine can produce animal feed pellets with diameter from 0.9-12mm, applicable to produce pet food, fish feed pellets, shrimp feed and other animal feed pellets.
This series of
poultry feed mill is used for making pet feed, with high capacity, stable performance and easy operation. Pellets produced by the machine is smooth, good hardness.

featurs of fish feed extruder

The Twin-screw extruder is made of the feeding system, extruding system, cutting system, heating system, transmission system and controlling system.
We will feed the material from the feeding machine and get the tissue state by inflating the material and the
feed pellet making mill barrel must be high temperature, high pressure and high cutting. The material can be sterilized by the high temperature and high pressure and make the product safe.
The pet food machine is reasonable design, high capacity and high automatation.
The pet food consist of corn powder, soya powder, meat powder, bone powder etc. materials, raw materials are low cost but end pet food product is with high profit.
The screws are made of 38 CrMoAl, which is a speicial kind of ally steel and special design according to product’s requirement, using life is long, has combined model can freely assemble to get different status product.
Self-cleaning, when stopping, it can be cleaned without disassembling.


DGP-70.jpg DGP80-B 

about us

pelletmakingmill

Author:pelletmakingmill
animal feed pellet mill for making chicken feed, pig feed,and so on for your poultry farm

new articles
blog archieves
month archieves
calendar
09 | 2017/10 | 11
sun mon tue wed thu fri sat
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31 - - - -
friendly links
contact us

Name:
Email:
Title:
Text:

search
RSS
adding friends

adding this blog as a friend

new comment
new quote