What to Do Before Starting model 300 Electric Pellet Mill?

 
This portable electric pellet mill can be used, together with hammer mill, feed blender, conveyor and pellets packing machine, to make animal feed pellets for chicken, cattle, duck, cow, sheep, pig, etc. on a small scale. By the way, this pellet mill also can be used to make wood pellets from wood wastes. If you want to start a small feed pellet plant or wood pellet plant, model 300 is a right choice for you to earn money with less investment.
feed pellet mill
Structure of model 300 Movable Pellet Press
the_structure_of_AZSPLM300B_feed_pellet_mill
 Name Name Name Name Name
1Upper hopper4Lower shell7Discharge gate10Current meter13Electric control box support
2Adjusting screw5Dipstick8Gear box11Voltmeter14base
3Upper shell6Checking screen9Base wheel12Electric control box15Motor

Features of This Small Pellet Mill

1. It has simple structure and it can be easily cleaned and maintained.
2. It provides small capacity at lower price; it is in small size and light weight; it is a best choice for pellet production on a small scale.
3. This
animal feed pellet mill is easy to operate--just 1 or 2 workers can operate the pellet machine.
4. Operators are able to have a view of the chamber, so it is easy to find problems during pelleting.
5. Spare parts, i.e. rollers and die are easy to change.
6. It is also a right choice for wood pellet producers and animal bedding pellet producers.
What to Do Before Starting model 300 Electric Pellet Mill?
A. Location
1. Place the pellet machine at a  safe and dry place. 
2. Do not operate the
feed pellet mill at a temperature of below 10 degree celsius.
3. Make sure all bolts and nuts are securely tightened before operation.
B. Test Run
Before starting producing pellets, it is important to polish the die to make it smooth. To do this, you need to prepare 5kg flour, 5kg fine sand and 1.5 liter vegetable oil, and then mix the ingredients into a bucket. next, start the
pellet making machine, and then put a proper amount of mixed materials into the mill and let them run through the die hole. You should do this repeatedly for 40-60 minutes.
C. Before first run, adopt grease to lubricate all bearings. The operator needs to do this once at lease every 10 hours.
/ingredients__to_polish_the_die_of_flat_die_pellet_mill
D. Set the pressure for the roller wheels. To do this, just drag the die and find whether it can rotate under the rollers. The gap between rollers and die should be controlled within 0.1-0.3mm.

How to Make Pellets by model 400 Electric Flat Die Pellet Mill?

It is advisable for you to buy model 400 electric pellet mill to turn agricultural wastes or wood residues into wood pellets for heating and cooking or make your own feed pellets for animals, if you have a large quantity of wood residues; or you own a large farm and having many agricultural wastes to dispose of; or you are a farmer who breeds animals, such as chicken, ducks, sheep, cattle or pigs, etc.


Features of model 400 Electric Flat Die Pellet Mill

1. Due to its structure, this pellet press can process various biomass materials and grains into fuel pellets or feed pellets.
2. Both the flat die and rollers are made of high-quality alloy steel, so it is wear resistant and it has a long service life.
3. Just following the manual, you can easily operate the
feed making machine to make your own pellets.
4. It is in small size, thus it is easy to move.
5. It can be easily maintained.
6. Just one or two persons can operate it.

How to Make Pellets by model 400 Electric Flat Die Pellet Mill?


1. Insert the plug of the machine, and press the start button. The engine should start and the rollers rotate. If the rollers do not rotate, press the stop button immediately to check for fault.
2. Place a container under the pellet discharge chute.
3. Feed the raw materials into the feeding hopper and then control the speed by the handle of the feeding control tray.
4. After a short time, pellets will fall into the container. After cooling, pellets will become hard.
5. Feed the rest of the material and change the container when it is full.
6. Do not stop the
price for sale of feed pellet mill during the pelletizing (except for emergency), otherwise the pellet machine will be clogged when restarting.
7. Stop the pellet mill by pressing the stop button.
8. Clean the pellet mill after a shift. This step is very important as if the residual raw material will stick on the roller and die when it cools completely and it is difficult to be removed.

How to Change Rollers and Dies of This Flat Die Pellet Machine?

1. Disconnect the power connector
2. Remove the feed hopper
3. Loosen the nuts on the handle of the feed control tray, as shown in picture 
4. Loosen the nuts which fix the two sides of the die and the feed control tray, as shown in picture 
5. Lift down the feed control tray, as shown in picture 
6. Loosen the big nut and remove it, as shown in picture 
7. Take down the roller, as shown in picture 
8. Tightening the nuts on both sides of the die, as shown in picture 
9. Lift down the die, as shown in picture 

10. Change for the new rollers and the die.
11. Set the machine back together with the new roller and die in reverse order.

Why Choose Wet Type Floating Fish Feed Pellet Mill

 Why Choose Wet Type Fish Feed Pellet Mill                                                                                                                                                Steam Boiler
steam boiler
According to your requirement and production scale, we can supply two types of fish feed making machine: dry type and wet type. However, what is difference and why choose the wet one? Please follow me to learn about pellet extrusion principle. Pellet extrusion is a process where the feedstuff is subject to mixing and heating under high pressure before being forced through a die mould. The feed constituents undergo transformations during the processing that can be beneficial as they are fully cooked and the nutritional value is improved. A temperature higher than 100 ℃ is needed in order to achieve expansion of the feed as it leaves the die. Extrusion temperature is usually a targeted value obtained through steam added in the pre-conditioner. Our wet type fish feed extruder machine is connect to a boiler which can continuously provide steam to the conditioner.
Wet Type Fish Feed Mill Application
◆ Make high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc.
◆ Ideal for making pet food for dogs, cats, etc.
◆ First choice of fish feed pellets manufacturers.
fishes
floating fish food processing
fish food
pet dog food
The Features of Wet Type Fish Pellet Pellet Press
1. You can change different molds to make pellets with different diameters.
2. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours.
3. The fish feed pellet size can be from 0.9-15mm to feed different size fishes.                                                                                                              
4. The spare parts like screw, barrel of wet type will be less damaged than dry type.
5. The feed pellet made by wet type fish
feed pellet mill is more smooth and with better quality. 
6. High temperature and high pressure process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
Attentions
◆ Our fish feed extruder is of single screw design.
◆ The pellets extruded from such
animal feed pellet mill is about 80℃ and moisture content is 18%-20%, so you should equip a dryer and cooler if the capacity is more than 500kg/h. While for small capacity, you can dry them in the sun.
◆ We provide technical formula for making floating fish feed pellets after placing order.
◆ We send extra easy wear parts for free including two sleeves, one screw, one cutting knife and three die moulds.
about us

pelletmakingmill

Author:pelletmakingmill
animal feed pellet mill for making chicken feed, pig feed,and so on for your poultry farm

new articles
blog archieves
month archieves
calendar
09 | 2017/10 | 11
sun mon tue wed thu fri sat
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31 - - - -
friendly links
contact us

Name:
Email:
Title:
Text:

search
RSS
adding friends

adding this blog as a friend

new comment
new quote